Magnum V8-5.7L (2008)
9. On each side of crossmember rear, guide leading end of rear parking brake through crossmember bracket (1 - left)(2 - right) near equalizer and
press cable housing retainer into bracket allowing retainer fingers to lock cable in place.
10. On each side of crossmember rear, install J-nut for parking brake cable guide.
11. On each side, install screw fastening parking brake cable routing guide (1) to crossmember.
12. Install stabilizer bar (4) with cushions and retainers on crossmember.
13. Install cushion retainer mounting bolts (1). Do not tighten at this time.
14. Install bolt (3) and nut fastening stabilizer bar ends to each stabilizer link (2). Do not tighten at this time.
15. Tighten cushion retainer mounting bolts (1) to 60 Nm (44 ft. lbs.).
