Magnum V8-5.7L (2008)
manual lever.
7. Raise vehicle.
8. Verify that the transmission is in the PARK position by trying to rotate the propeller shaft. If the propeller shaft rotates, move the transmission
manual shift lever to the full rearward position and turn the propeller shaft until the PARK system is engaged.
9. Route the gearshift cable (1) through the mounting bracket (2).
10. Engage the gearshift cable (1) eyelet onto the transmission manual shift lever (3).
11. Lower vehicle.
12. Verify that the shifter is in the PARK position.
13. Tighten the adjustment screw (5) to 7 Nm (65 in.lbs.).
14. Verify correct shifter operation.
15. If necessary, install the shield, covering the gearshift and park lock cables, to the floorpan and install the bolts to hold the shield to the floorpan.
16. Install the floor console See: Body and Frame/Interior Moulding / Trim/Console/Service and Repair/Floor Console - Installation, lower instrument
panel components See: Body and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair/Instrument Panel Center
Bezel - Installation and dash panel insulation pad as necessary.
