Magnum V8-5.7L (2008)
6. Place the floor shifter lever in PARK position.
7. Loosen the adjustment screw (5) on the gearshift cable (1).
8. Install the gearshift cable (1) to the shift lever pin (3).
Shifter Wiring Connectors
9. Install the wiring harness connectors (2) to the shifter assembly.
10. Verify that the shift lever is in the PARK position and the transmission park sprag is set by rocking the vehicle.
11. Tighten the adjustment screw to 7 Nm (65 in.lbs.).
12. Verify correct shifter, park lock, and BTSI operation.
13. Install any console parts removed for access to shift lever assembly and shift cables. See: Body and Frame/Interior Moulding /
Trim/Console/Service and Repair/Floor Console - Installation
