Magnum V8-5.7L (2008)
7. If rotating torque is low, increase pinion flange nut torque in 7 Nm (5 ft. lbs.) increments. Repeat until proper rotating torque is received.
8. Stake pinion flange nut (1) as shown.
9. Install rear axle assembly.
7. If rotating torque is low, increase pinion flange nut torque in 7 Nm (5 ft. lbs.) increments. Repeat until proper rotating torque is received.
8. Stake pinion flange nut (1) as shown.
9. Install rear axle assembly.