Magnum V8-5.7L VIN 2 (2007)
Garage Door Opener Transmitter: Description and Operation
DESCRIPTION
The universal transmitter transceiver is integral to the overhead console. The only visible component of the universal transmitter are the three transmitter
push buttons (4) at the front of the overhead console. The buttons are marked with one, two or three illuminated dots, respectively, for identification of
each channel.
Each of the three universal transmitter push buttons controls an independent radio transmitter channel. Each of these three channels can be trained to
transmit a different radio frequency signal for the remote operation of garage door openers, motorized gate openers, home or office lighting, security
systems or just about any other device that can be equipped with a radio receiver in the 286 to 399 Megahertz (MHz) frequency range for remote
operation. The universal transmitter is capable of operating systems using either rolling code or non-rolling code technology. The system will not
transmit operating signals if the Vehicle Theft Security System is armed.
The universal transmitter cannot be repaired, and is available for service only as a unit. This unit includes the push button switches and the plastic
module.
