dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Radio/Stereo Noise Filter > < Radio Receiver|Removal|Page 10216
Page 2
background image

The vehicle must be outside with the audio system powered on, in the satellite radio mode, to receive the activation signal.

NOTE:  A battery reconnect procedure must be performed anytime the battery has been disconnected.

1. Install and tighten module to mounting bracket fasteners (2).

2. Position module into place.

3. Install and tighten mounting bracket fasteners.

4. Connect antenna harness connectors.

5. Connect electrical harness connectors.

6. Install left rear quarter trim panel.

7. Connect battery negative cable.

Radio/Stereo Noise Filter > < Radio Receiver|Removal|Page 10216