Magnum V8-5.7L VIN 2 (2007)
NOTE: Charger vehicles only.
12. Install the screw (6) that secures the front fascia assembly (5) to the nut insert (1) in each front fender.
13. Partially lower the vehicle and install the push-pin retainers (4) (four-sedan, six-wagon, eight-Charger) that secure the front fascia assembly to the
upper radiator support.
14. Carefully pull the front fascia assembly rearward to engage the fastener (6) from the slot in each side the fascia and position the fascia to gain
access to the fog lamp wire harness connectors (7), if equipped.
15. Position the belly pan (2) to the front of the vehicle underbody and install the nine screws (1). Tighten the screws securely.