Magnum V8-5.7L VIN 2 (2007)
Hood Shock / Support: Service and Repair
Rod-Prop
Removal
REMOVAL
1. Open and support the hood.
2. Remove the blind rivet (1) that secures the hood prop rod (2) pivot bracket to the right side of the headlamp mounting crossmember (3).
3. Disengage the prop rod from the rod clip (4) on the left side of the headlamp mounting crossmember.
4. Remove the hood prop rod from the vehicle.
Installation
INSTALLATION
1. Position the hood prop rod (2) pivot bracket to the right side of the headlamp mounting crossmember (3).
2. Secure the pivot bracket to the headlamp mounting crossmember with a new blind rivet (1).
3. Engage the prop rod into the rod clip (4) on the left side of the headlamp mounting crossmember.
4. Close the hood.