Magnum V8-5.7L VIN 2 (2007)
Trim Panel: Service and Repair
Cowl Trim
Upper
UPPER
1. Insert trim stick from the outside in the direction of arrow (2) under the middle of the part.
2. Then slide trim stick up to the upper spring clip retainer, and pry to disengage clip.
3. Slide the trim stick down to the lower spring clip retainer, and pry to disengage clip.
4. Remove the upper cowl trim from the vehicle.
Lower
LOWER
1. Remove the upper cowl trim from the front of the front door opening.
2. Using a trim stick or another suitable wide flat-bladed tool and starting nearest the B-pillar trim (2), carefully pry the lower cowl trim (3) upward
from the front door opening sill far enough to disengage the three spring clip retainers that secure the trim to the slots in the sill.
3. Using a trim stick or another suitable wide flat-bladed tool, carefully pry the lower cowl trim rearward from the front of the front door opening far
enough to disengage the spring clip retainer that secures the trim to the slot in the cowl (1).
4. Remove the lower cowl trim from the vehicle.
