Magnum V8-5.7L VIN 2 (2007)
7. Push in the buttons on both headrest sleeves, pull the headrest up and remove.
8. Separate the j-straps (1 & 2) and pull cover up over frame and remove cushion.
9. Pinch both headrest sleeve ribs from inside the seat back frame with pliers or equivalent.
10. Strike the bottom of the sleeve with a rubber mallet or equivalent, and remove the headrest sleeves.
Installation
INSTALLATION
1. Before proceeding with the following repair procedure, review all warnings and cautions.
2. Position the seat back cover over the seat back frame and install the headrest sleeves.
3. Position the seat back cushion on the frame and position the cover over the cushion.
4. Connect the j-straps (1 & 2).
