Magnum V8-5.7L VIN 2 (2007)
5. Disconnect ABM harness connector from antilock brake module (ABM). To do so:
a. Depress tabs on each side of connector cover, then
b. Pull outward and upward on lower half of cover until it locks into position pointing straight outward (2). Connector can then be pulled straight
outward off ABM (1).
6. Pull up on unit (1) and remove from mounting grommets (2) in body side rail.
Installation
INSTALLATION
1. Install unit (1), pushing mounting bracket down into mounting grommets (2) located in body side rail.
