Magnum V8-5.7L VIN 2 (2007)
CAUTION: Before installing the ABM harness connector (2) on the ABM (1), be sure the seal is properly installed in the connector.
2. Insert ABM harness connector (2) into socket of ABM (1) and close cover, locking connector in place.
3. Install left (2) and right (1) rear brake tubes at hydraulic control unit (4). Tighten tube nuts to 20 Nm (177 in. lbs.) torque.
4. Install left (2) and right (3) brake tubes at hydraulic control unit (4). Tighten tube nuts to 20 Nm (177 in. lbs.) torque.