Magnum V8-5.7L VIN 2 (2007)
5. Disconnect wiring harness connector (4) from brake fluid level sensor (2) in master cylinder brake fluid reservoir (1).
6. Disconnect primary (3) and secondary (2) brake tubes from master cylinder (4). Install sealing plugs in open brake tube outlet ports.
CAUTION: Before removing master cylinder from power brake vacuum booster, master cylinder and vacuum booster must be
thoroughly cleaned. This must be done to prevent dirt particles from falling into power brake vacuum booster. Use only Mopar(R) Brake
Parts Cleaner or equivalent.
7. Remove two nuts (2) attaching master cylinder (3) to power brake booster (1).
8. Slide master cylinder (3) straight out of power brake booster (1).
