Magnum V8-5.7L VIN 2 (2007)
24. Sight through the V-notch in the upper edge of the aim board to align and center the board to the centerline marks on both the windshield and the
rear glass.
25. Adjust the tripod so that the top edge of the aiming board is level at BOTH CORNERS to the following dimension:
-
Rear Wheel Drive 884 millimeters (34 13/16) inches)
-
All Wheel Drive 894 millimeters (35 3/16) inches)
CALIBRATION PROCEDURE
1. Turn the ignition switch to the ON position.
2. Connect a scan tool to the Data Link Connector (DLC) (1) below the driver side end of the instrument panel (2).
3. Obtain vehicle information, select ECU View from the Home Screen.
4. The Scan tool will then show a list of all ECU's available on the vehicle.
5. Select the ACC Adaptive Cruise Control from the ECU view screen.
6. The next screen ECU Overview window appears, select the MISC. Functions.
7. Select the Align ACC sensor and press Start.
8. Follow the scan tool instructions.
