Magnum V8-5.7L VIN 2 (2007)
Connecting Rod: Procedures
Piston and Connecting Rod - Cleaning
CLEANING
CAUTION: DO NOT use a wire wheel or other abrasive cleaning devise to clean the pistons or connecting rods. The pistons have a Moly
coating, this coating must not be damaged.
1. Using a suitable cleaning solvent clean the pistons in warm water and towel dry.
2. Use a wood or plastic scraper to clean the ring land grooves.
CAUTION: DO NOT remove the piston pin from the piston and connecting rod assembly.
Piston and Connecting Rod - Inspection
INSPECTION
Check the connecting rod journal for excessive wear, taper and scoring.
Check the connecting rod for signs of twist or bending.
Check the piston for taper and elliptical shape before it is fitted into the cylinder bore.
Check the piston for scoring, or scraping marks in the piston skirts. Check the ring lands for cracks and/or deterioration.
