Magnum V8-5.7L VIN 2 (2007)
6. Remove the belly pan (2).
7. Remove both left and right side engine mount to frame fasteners.
8. Drain engine oil and remove the oil filter.
9. Unbolt (2,3,4) and lower the steering rack (1) from the mounts. Do not remove P/S hoses, tie rod ends or disconnect steering column.
10. Remove the engine oil dipstick and tube from the oil pan.
11. Remove the left and right side exhaust at the manifolds.
12. Mark the front driveshaft to the flange at both ends to ensure correct installation.
13. Remove front drive shaft fasteners from the differential and transfer case. Remove the driveshaft from the vehicle.
14. Remove the left (2) and right front drive axles.
