Magnum V8-5.7L VIN 2 (2007)
15. Remove the differential support bracket (1) from the differential to the engine block.
16. Unbolt the differential (4) from the oil pan (3).
17. Rotate the differential (4) so the drive flange is facing forward and the oil pan side is facing up. Remove the differential out through the opening at
the rear of the cradle.
18. Remove the intermediate shaft (2) from the oil pan (3).
19. Lower the vehicle.
20. Install engine support fixture special tool # 8534. Do not attempt to fasten fixture to vehicle body, or attach the third support leg to the
radiator support.
21. Raise engine using special tool # 8534 and #8984 to provide clearance to remove oil pan.
22. Raise vehicle.
NOTE: Do not pry on oil pan or oil pan gasket. Gasket is integral to engine windage tray and does not come out with oil pan.