Magnum V8-5.7L VIN 2 (2007)
Front Crankshaft Seal: Service and Repair
Installation
INSTALLATION
CAUTION: The front crankshaft seal must be installed dry. Do not apply lubricant to sealing lip or to outer edge.
1. Using Special Tool 9072 and 8512A, install crankshaft front seal.
CAUTION: To prevent severe damage to the Crankshaft or Damper, thoroughly clean the damper bore and the crankshaft nose before
installing Damper.
2. Install vibration damper.
3. Install radiator cooling fan and shroud.
4. Install upper radiator hose.
5. Install accessory drive belt.
6. Refill cooling system.
7. Connect negative cable to battery.
