Magnum V8-5.7L VIN 2 (2007)
NOTE: LHD model shown in illustrations. RHD model similar.
FRONT FLOOR DISTRIBUTION DUCT
1. Position the front floor distribution duct (2) to the bottom of the HVAC air distribution housing (3).
2. Install the six screws (1) that secure the front floor distribution duct to the air distribution housing. Tighten the screws to 2 Nm (17 in. lbs.).
3. Install the air distribution housing.
INTERMEDIATE FLOOR DISTRIBUTION DUCTS
4. Install the driver side rear intermediate floor distribution duct (5) and the passenger side rear intermediate floor distribution duct (3) into the slots
in the floor support (4).
5. Connect the driver side front intermediate floor distribution duct (7) to the driver side rear intermediate floor distribution duct.
6. Connect the driver side front intermediate floor distribution duct to the front floor distribution duct (8).
7. Install the push-pin fastener (6) that secures the driver side rear intermediate floor distribution duct to the floor support.
8. Connect the passenger side front intermediate floor distribution duct (2) to the passenger side rear intermediate floor distribution duct.
9. Connect the passenger side front intermediate floor distribution duct to the front floor distribution duct.
10. Install the push-pin fastener (1) that secures the passenger side front intermediate floor distribution duct to the floor support.
11. Install the carpet onto the front floor panel and under the instrument panel.
12. Install the front seats.
