Magnum V8-5.7L VIN 2 (2007)
1. Turn the ignition switch to the On position.
2. Depress and hold the C/T push button (3) for approximately two seconds.
3. Use the SCROLL buttons (3) until MANUAL COMPASS CALIBRATION is highlighted.
4. Press and release the FUNCTION SELECT button (1) to start the calibration. The message "CAL" will appear in the EVIC display.
5. Drive the vehicle on a level surface, away from large metal objects and power lines, through one or two complete circles in not less than 16
seconds. The "CAL" message will disappear from the display to indicate that the compass is now calibrated.
NOTE: A blank compass display indicates that vehicle degaussing (demagnetizing) is necessary.
NOTE: If the "CAL" message remains in the display, either there is excessive magnetism near the compass, or the unit is inoperative. Repeat the
calibration procedure at least one more time.
NOTE: If the wrong direction is still indicated in the compass display, the area selected for calibration may be too close to a strong magnetic field.
Repeat the calibration procedure in another location.