Magnum V8-5.7L VIN 2 (2007)
lbs.).
6. Raise and support the vehicle.
7. Remove the tape or plugs from the fitting on the front section of the A/C liquid line (4) and the outlet port of the A/C condenser (5).
8. Lubricate a new dual plane seal with clean refrigerant oil and install it onto the liquid line fitting. Use only the specified seal as it is made of a
special material for the R-134a system. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
9. Connect the A/C liquid line to the A/C condenser.
10. Install the nut (3) that secures the front section of the A/C liquid line to the A/C condenser. Tighten the nut to 22 Nm (16 ft. lbs.).
11. Install the front belly pan.
12. Lower the vehicle.
13. Install the air cleaner housing.
14. Reconnect the negative battery cable.
15. Evacuate the refrigerant system.
16. Adjust the refrigerant oil level.
17. Charge the refrigerant system.
REAR SECTION
NOTE: LHD model shown. RHD model similar.