Magnum V8-5.7L VIN 2 (2007)
26. Install the nut (6) that secures the front section of the A/C liquid line to the rear section of the A/C liquid line. Tighten the nut to 22 Nm (16 ft.
lbs.).
27. Remove the tape or plugs from the fittings that connect the front section of the A/C suction line (9) to the rear section of the A/C suction line.
28. Lubricate a new dual plane seal with clean refrigerant oil and install it onto the suction line fitting. Use only the specified seal as it is made of a
special material for the R-134a system. Use only refrigerant oil of the type recommended for the A/C compressor in the vehicle.
29. Connect the front section of the A/C suction line to the rear section of the A/C suction line.
30. Install the nut (7) that secures the front section of the A/C suction line to the rear section of the A/C suction line. Tighten the nut to 22 Nm (16 ft.
lbs.).
31. Install the air cleaner housing.
32. Reconnect the negative battery cable.
33. Evacuate the refrigerant system.
34. Adjust the refrigerant oil level.
35. Charge the refrigerant system.
