Magnum V8-5.7L VIN 2 (2007)
Ignition Coil: Service and Repair
Removal
5.7/6.1L
A separate ignition coil (1), mounted to the valve cover is used for each cylinder. Each coil fires the two spark plugs at times predetermined by the
Powertrain Control Module (PCM).
1. Unlock electrical connector (1) by pressing on tab while pulling electrical connector from coil.
2. Remove two coil mounting bolts (3).
3. Carefully pull up coil from cylinder head opening with a slight twisting action. Twisting will help break loose boots (1) from spark plugs.