Magnum V8-5.7L VIN 2 (2007)
Antenna Control Module: Service and Repair
Installation
INSTALLATION
SEDAN
NOTE: A battery reconnect procedure must be performed anytime the battery has been disconnected.
1. Position module into place.
2. Install and tighten mounting fasteners.
3. Connect wire harness connectors and antenna cable to antenna module.
4. Install C-pillar upper trim.
5. Connect battery negative cable.
WAGON
1. Position module into place.
2. Install and tighten mounting fasteners.
3. Connect wire harness connectors and antenna cable to antenna module.
4. Install the liftgate trim.
5. Connect the battery negative cable.
