Magnum V8-5.7L VIN 2 (2007)
Technical Service Bulletin # F50
Date: 070212
Recall - ABS Module Reprogramming
February 2007
Dealer Service Instructions for:
Safety Recall F50
Reprogram ABS Control Module
Models
2007 (LX) Chrysler 300, Dodge Charger and Magnum - built from September 7, 2006 through November 18, 2006 (MDH 090701 - 111801).
2007 (JS) Chrysler Sebring - built from October 10, 2006 through November 15, 2006 (MDH 101019 - 111509).
2007 (PM) Dodge Caliber - built from September 7, 2006 through November 18, 2006 (MDH 090707 - 111801).
2007 (MK49) Jeep(R) Compass - built from September 7, 2006 through November 18, 2006 (MDH 090707 - 111801).
2007 (MK74) Jeep Patriot - built from September 7, 2006 through November 18, 2006 (MDH 090707 - 111801).
2007 (WK) Jeep Grand Cherokee - built from October 18, 2006 through December 6, 2006 (MDH 101813 - 120606).
2007 (XK) Jeep Commander - built from October 18, 2006 through December 6, 2006 (MDH 101813 - 120606).
2007 (KJ) Jeep Liberty - built from September 18, 2006 through November 30, 2006 (MDH 091807 - 113018).
2007 (KA) Dodge Nitro - built from September 18, 2006 through November 30, 2006 (MDH 091807 - 113018).
2007 (JK) Jeep Wrangler - built from November 9, 2006 through December 8, 2006 (MDH 110914 - 120811).
NOTE:
This recall applies only to the above vehicles equipped with an ESP/ABS system (sales code BNB, BRF, BRY, BR1 or BR3).
IMPORTANT:
Some of the involved vehicles may be in dealer new vehicle
inventory. Federal law requires you to complete this recall service on these vehicles before retail delivery. Dealers should also consider this requirement
to apply to used vehicle inventory and should perform this recall on vehicles in for service. Involved vehicles can be determined by using the VIP inquiry
process.
Subject
The software programmed into the Anti-Lock Brake System (ABS) control module on about 50,600 of the above vehicles may cause the rear brakes to
lock up during certain braking conditions. This could result in a loss of vehicle control and cause a crash without warning.
Repair
The ABS control module must be reprogrammed (flashed).
Parts Information
No parts are required to perform this service procedure.
Special Tools
