Magnum V8-5.7L VIN 2 (2007)
Seat Belt Retractor: Service and Repair
Removal
REMOVAL
FRONT
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component
service. Failure to do so may result in accidental airbag deployment, personal injury or death.
2. Remove trim cover (3) from the seat cushion outboard trim cover.
3. Remove seat belt (1) lower anchor nut (2) from seat cushion frame.
4. Remove the upper turning loop (3) trim cover (2).
5. Remove the upper turning loop retaining bolt (4).
