Magnum V8-5.7L VIN 2 (2007)
Seat Occupant Sensor: Service and Repair
Removal
REMOVAL
MANUAL PASSENGER FRONT SEAT
WARNING: The Seat Weight Sensor is a sensitive, calibrated unit and must be handled carefully. Do not drop or handle roughly. If dropped
or damaged, replace with another sensor. Failure to do so may result in occupant injury or death.
WARNING: The front passenger seat must be handled carefully as well. When removing the seat, be careful when setting on floor not to drop.
If dropped, the sensor may be inoperative, could result in occupant injury, or possibly death.
WARNING: When the seat is on the floor, no one should sit in the front passenger seat. This uneven force may damage the sensing ability of
the seat weight sensors. If sat on and damaged, the sensor may be inoperative, could result in occupant injury, or possibly death.
1. Disconnect and isolate the battery negative cable.
WARNING: Wait two minutes for the airbag system reserve capacitor to discharge before beginning any airbag system or component
service. Failure to do so may result in accidental airbag deployment, personal injury or death.
2. Remove front passenger seat.
3. Remove the adjuster to riser mounting bolt (3). For additional information.
