Magnum V8-5.7L VIN 2 (2007)
3. Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)).
4. Lower vehicle.
5. Perform wheel alignment setting toe to specifications.
6. Tighten tie rod jam nut (1) to 75 Nm (55 ft. lbs.).
Outer Tie Rod - Rear-Wheel-Drive
OUTER TIE ROD - REAR-WHEEL-DRIVE
CAUTION: When rotating inner tie rod, use care not to twist bellows at inner tie rod. Remove clamp at inner tie rod and make sure bellows
moves freely before rotating inner tie rod.
1. Thread outer tie rod (5) onto inner tie rod (4), Install outer tie rod same number of turns as when removed.
