dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Control Arm|Front|Page 8482 > < Control Arm|Front|Page 8480
Page 24
background image

18.   Install tire and wheel assemblies (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)).
19.   Lower vehicle.
20.   Perform wheel alignment. 

Left Link

LEFT LINK

1.   Raise and support vehicle.

2.   On both sides of vehicle, remove wheel mounting nuts (3), then rear tire and wheel assembly (1).

WARNING: Before opening fuel system, review all Warnings and Cautions.

Control Arm|Front|Page 8482 > < Control Arm|Front|Page 8480