Magnum V8-5.7L VIN 2 (2007)
21. Carefully mark location of rear crossmember on body at all four mount (bushing) locations using a marker or crayon. Do not use a scratch awl to
mark location.
22. Position an extra pair of jack stands under and support forward end of engine cradle to help stabilize vehicle during rear suspension
removal/installation.
23. Position under-hoist utility jack or transmission jack (3) under center of rear axle differential (1). Raise jack head to contact differential and secure
in place. When securing crossmember to jack, be sure not to secure stabilizer bar.
WARNING: Before opening fuel system, review all Warnings and Cautions.
24. Remove fuel filler tube.
