Magnum V8-5.7L VIN 2 (2007)
21. If vehicle is equipped with AWD, insert spacers (1) on top of left crossmember mount bushings (2) before crossmember is raised into place.
NOTE: There are four crossmember mounting bolts. Rear mounting bolts (2) are longer than front mounting bolts (3). Do not
interchange mounting bolts.
22. Raise left side of crossmember (1) into mounted position. Install left side crossmember mounting bolts (2 and 3). Snug, but do not fully tighten
bolts at this time.
23. Shift crossmember as necessary to line up mounts (3) with location marks drawn on body (1) before removal.