Magnum V8-5.7L VIN 2 (2007)
10. Slide stabilizer link ball joint stem into clevis bracket. Install nut (2) fastening link to clevis bracket (3). Tighten nut by holding ball joint stud
while turning nut. Tighten nut using crow foot wrench on torque wrench to 128 Nm (95 ft. lbs.).
11. Install tire and wheel assembly (1). Tighten wheel mounting nuts (3) to 150 Nm (110 ft. lbs.) (Police - 190 Nm (140 ft. lbs.)).
12. Lower vehicle.
NOTE: When tightening lower shock clevis mounting bolt, do not attempt rotating bolt. Bolt shaft is serrated. Turn nut only.
13. Tighten lower shock clevis bracket bolt nut (3) to 174 Nm (128 ft. lbs.).
Rear-Wheel-Drive
REAR-WHEEL-DRIVE
