Magnum V8-5.7L VIN 2 (2007)
19. Using an assistant, position the windshield (2) over the windshield opening.
20. Using the grease pencil marks or tape as reference points, align the windshield to the opening.
21. Carefully lower the windshield onto the windshield fence. Guide the windshield and the rubber seal at the top the windshield into its proper
location.
CAUTION: It is not possible to move the windshield after installation. The windshield should never be pressed into place by more than one
person, because the windshield can break if pressed simultaneously on both sides.
22. Push the windshield inward until the windshield comes into contact with the spacers located on each side of the windshield fence (2).
23. Install the windshield side moldings.
24. Install the cowl grille.
25. Install the rear view mirror.