dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Front Bumper Cover / Fascia|Service and Repair|Page 6819 > < Front Bumper Cover / Fascia|Service and Repair|Page 6817
Page 3
background image

9. If equipped, disconnect each fog lamp wire harness connector (1) from the headlamp wire harness (2) and remove the front fascia assembly (3)

from the vehicle.

10. If equipped and if required, remove the fog lamps from the front fascia assembly.
11. If required on SRT8 models, remove the lower fascia from the front fascia assembly and discard the metal retaining clips.

12. If required, remove and discard the nut insert (1) from each front fender and remove the push-pin retainer (2).

INSTALLATION

Front Bumper Cover / Fascia|Service and Repair|Page 6819 > < Front Bumper Cover / Fascia|Service and Repair|Page 6817