Magnum V8-5.7L VIN H (2005)
Parking Brake Cable: Service and Repair
Front
CABLE - PARKING BRAKE FRONT
REMOVAL
NOTE: Before proceeding, Refer to WARNING and CAUTION.
1. Raise and support vehicle.
NOTE: Due to short travel and low spring tension, it is not necessary to lock-out parking brake lever to service parking brake components.
2. Disconnect front parking brake cable (2) at connector (1) to right rear parking brake cable.
3. Remove front cable from equalizer (4).
4. Remove screw (2) fastening cable routing bracket (1) to rear crossmember.
