Magnum V8-5.7L VIN H (2005)
CAUTION: The rocker shaft assemblies are not interchangeable between intake and exhaust. The intake rocker arms are marked with an "I".
4. Remove the rocker shafts. Note location for reassembly.
CAUTION: The longer push rods are for the exhaust side, and the shorter push rods are for intake side.
5. Remove the pushrods. Note pushrod location for reassembly.
CAUTION: Do not remove the retainers from the rocker shaft. The assembly tangs (1) at the bottom of the retainers (2) can be damaged, causing
the assembly tangs to break off, and get into the engine.
INSTALLATION
CAUTION: The longer push rods are for the exhaust side, and the shorter push rods are for intake side.
1. Install the push rods in the same order as removed.
2. Install the pushrod retaining plate (1) special tool 9070.
