Magnum V8-5.7L VIN H (2005)
CAUTION: The front crankshaft seal must be installed dry. Do not apply lubricant to sealing lip or to outer edge.
1. Using Special Tool 8348 and 8512A, install crankshaft front seal.
CAUTION: To prevent severe damage to the Crankshaft or Damper, thoroughly clean the damper bore and the crankshaft nose before installing
Damper.
2. Install vibration damper.
3. Install radiator cooling fan and shroud.
4. Install upper radiator hose.
5. Install accessory drive belt refer.
6. Refill cooling system.
7. Connect negative cable to battery
