Magnum V8-5.7L VIN H (2005)
8. Remove the two screws (1) that secure the flange (2) to the front of the HVAC housing (3).
9. Remove the flange and the heater core tubes (4) from the HVAC housing.
NOTE: Take proper precautions to protect the carpeting from spilled engine coolant. Have absorbent toweling readily available to clean up any
spills.
10. Remove the two retaining clamps (1) that secure the heater core tubes (2) to the heater core (3).
11. Disconnect the heater core tubes from the heater core and remove and discard the O-ring seals.
12. Install plugs in, or tape over the opened heater core tubes and heater core ports.
