Magnum V8-5.7L VIN H (2005)
DTC's prior to returning the vehicle to the customer. Erase any DTC's in the PCM only after all other modules have had their DTC's erased. From the
"Home" screen select "System View", then select "All DTC's". Select the "Clear All Stored DTC's" if there are any DTC's stored.
FLASH PROCEDURE - USING SOFTWARE UPDATE CD TO RETRIEVE THE FLASH FILE:
NOTE:
Before flashing this module, make sure the StarSCAN(R) is operating at the latest software version and that this latest software version is available
from the latest StarSCAN(R) update CD. To determine the latest StarSCAN(R) software version level available refer to website under the "Latest
News" link.
NOTE:
If this flash process is interrupted/aborted, the flash should be restarted.
NOTE:
For detailed information on the operation of the StarSCAN(R), refer to the Quick Reference documentation provided in the StarSCAN(R)
documentation kit. In addition, more recent information may also be available at the website. Look under "Training Aids" and also under "Download
Center> Frequently Asked Questions" for more help.
1.
Retrieve the old FCM part number. Using the StarSCAN(R) at the "Home" screen:
a.
Select "ECU View".
b.
Touch the screen to highlight the PCM in the list of modules.
c.
Record the "Part Number", displayed on the "ECU Overview" screen, for later reference.
2.
Insert the USB Key, into the USB port on the TechCONNECT or equivalent PC (Fig. 1).
3.
Insert the StarSCAN(R) Software Update CD into the TechCONNECT or equivalent PC. The StarSCAN(R) Software Update CD will start
automatically.
a.
Select "Controller Flash".
b.
Follow the on screen instructions.
4.
At the "Select the type of information you wish to enter." screen:
a.
If the old "Part Number" was recorded in Step # 1, proceed to Step # 5.
