Magnum V8-5.7L VIN H (2005)
5. Inspect quick-connect fitting body and component for damage. Replace as necessary.
CAUTION: When the quick-connect fitting was disconnected, the plastic retainer will remain on the component being serviced. If this retainer
must be removed, very carefully release the retainer from the component with two small screwdrivers. After removal, inspect the retainer for
cracks or any damage.
6. Prior to connecting quick-connect fitting to component being serviced, check condition of fitting and component. Clean parts with a lint-free cloth.
Lubricate with clean engine oil.
7. Insert quick-connect fitting to component being serviced and into plastic retainer. When a connection is made, a click will be heard.
8. Verify a locked condition by firmly push-pulling-push on fuel tube and fitting (15-30 lbs.).
9. Connect negative cable to battery or auxiliary jumper terminal.
10. Use the DRB III(R) scan tool ASD Fuel System Test to pressurize the fuel system. Check for leaks.
