Magnum V8-5.7L VIN H (2005)
8. Position spark plug cable tray (7) and cable assembly to intake manifold. Snap 4 cable tray retaining clips into intake manifold.
9. Install all cables to spark plugs and ignition coils.
10. Connect electrical connector to throttle body.
11. Install electrical connectors to all 8 ignition coils.
12. Connect electrical connector to throttle body.
13. Connect electrical connectors at all fuel injectors. Refer to graphic. Push connector onto injector (1) and then push and lock red colored slider (2).
Verify connector is locked to injector by lightly tugging on connector.
14. Connect fuel line latch clip and fuel line to fuel rail.
15. Install air resonator to throttle body (2 bolts).
16. Install flexible air duct to air box.
17. Connect battery cable to battery.
18. Start engine and check for leaks.
