Magnum V8-5.7L VIN H (2005)
NOTE:
If this flash process is interrupted/aborted, the flash should be restarted.
1.
Connect the CH9404 StarSCAN vehicle cable to the StarSCAN and the vehicle.
2.
Connect the CH9410 StarSCAN ethernet cable to the StarSCAN and the dealer's network drop (optional).
3.
Retrieve the old PCM part number. Using the StarSCAN at the "Home" screen:
a.
Select "ECU View"
b.
Touch the screen to highlight the PCM in the list of modules.
c.
Select "More Options".
d.
Select "ECU Flash"
e.
Record the "Part Number", displayed on the "Flash PCM" screen, for later reference.
4.
If the StarSCAN is connected to the dealer's network drop and the vehicle, proceed to Step # 5. If the StarSCAN is not connected to the dealer's
network drop and the vehicle, proceed to Step # 10
5.
Select "Browse for new file".
6.
Select the appropriate calibration.
7.
Select "Download to Scantool".
8.
Select "Close" after the download is complete. Proceed to Step # 11.
9.
Connect the CH9410 StarSCAN ethernet cable to the StarSCAN and the dealer's network drop (if not already connected).
10.
Download the flash file from the Internet to the StarSCAN. Using the StarSCAN at the "Home" screen:
a.
Select "Flash Download".
b.
Select "Enter information manually". Press the "Next" button and follow the on screen instructions.
c.
Select the appropriate calibration.
d.
Select "Download to Scantool".
e.
Select "Close" after the download is complete.
11.
Connect the CH9404 StarSCAN vehicle cable to the StarSCAN and the vehicle (if not already connected).
12.
Open the hood, install a battery charger and verify that the charging rate provides approximately 13.5 volts.
13.
Download the file from StarSCAN to the vehicle. Using StarSCAN at the "Home" screen:
a.
Select "ECU View"
b.
Browse the list of controllers using the scroll arrows. Highlight the PCM.
c.
Select "More Options"
d.
Select "ECU Flash"
e.
Highlight the appropriate PCM "Calibration" from the list.
f.
Select "Update Controller"
g.
When update is completed, select "OK"
NOTE:
