Magnum V8-5.7L VIN H (2005)
2. Install and tighten the two screws (2) that secure the OCM to the OCM bracket. Tighten the screws to 2 N.m (20 in.lbs.).
3. Connect the two harness connectors (3) to the OCM.
WARNING:
-
DO NOT CONNECT THE BATTERY NEGATIVE CABLE. PERSONAL INJURY OR DEATH MAY RESULT IF THE
SYSTEM TEST IS NOT PERFORMED FIRST.
-
FOLLOWING SUCCESSFUL COMPLETION OF THE AIRBAG SYSTEM TEST PROCEDURE, THE OCCUPANT
CLASSIFICATION SYSTEM VERIFICATION TEST MUST BE DONE USING A SCAN TOOL AND THE APPROPRIATE
DIAGNOSTIC INFORMATION.
