Magnum V8-5.7L VIN H (2005)
6.
Remove the front door sill trim/kick panel (Figure 1).
7.
Remove the carpet push pin and then pull back the passenger side carpet and padding.
8.
Pull up the kick-up panel silencer pad to expose the battery cable bulkhead stud.
9.
Inspect the battery cable bulkhead stud for signs of arcing and/or cross-threading (Figure 2). If the bulkhead stud is damaged, continue with
Section B - Replace Battery Cable Bulkhead Stud.
10.
Tighten the battery cable-to-bulkhead stud fastener to 80 in-lbs (9 N.m) (Figure 2).
11.
Return the kick-up panel silencer pad to its original position.
12.
Install the carpet and padding and install the carpet push pin.
13.
Install the front door sill trim/kick panel (Figure 1).
14.
Install the passenger side floor mat.
15.
Close the front passenger door.
