Magnum V8-5.7L VIN H (2005)
9. Remove parking brake cable screw (2) at knuckle (3) and pull cable (1) out of knuckle.
10. Position under-hoist utility jack or jack stand under spring link. Raise jack head to contact spring link at shock mount secure in place.
11. Remove spring link-to-knuckle nut and bolt (2).
CAUTION: It important to use Guide (2), Special Tool 9361-2, when tapping sleeve in knuckle to help keep Tap (1), Special Tool 9361-1, straight
during use or damage to Tap may occur.
12. Place Guide 9361-2 (2) against sleeve (3) in knuckle to keep Tap 9361-1 (1) straight. Using Tap with an appropriate handle, cut threads
approximately halfway through bushing (or about six complete threads). It is important to back tap out, clean out burrs and lubricate Tap often
during process.
