dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Standard Procedure - Power Steering Pump Initial Operation|Page 5372 > < Standard Procedure - Power Steering Pump Initial Operation
Page 1
background image

Power Steering Pump: Service and Repair
Pump

PUMP 

REMOVAL
5.7L ENGINE
 

1. Disconnect and isolate battery negative cable (2) from battery post.
2. Siphon power steering fluid from pump reservoir.
3. Remove air cleaner housing and inlet tube to throttle body. 
4. Remove serpentine drive belt. 

5. Remove hose clamp, then supply hose (3) from pump (1).

Standard Procedure - Power Steering Pump Initial Operation|Page 5372 > < Standard Procedure - Power Steering Pump Initial Operation