Magnum V8-5.7L VIN H (2005)
5. On each side of vehicle, remove retainer halves (1)(2) from around stabilizer bar isolator (3).
6. Utilizing slit, remove each isolator (1) from stabilizer bar (2).
7. On each side of vehicle, remove nut (5) fastening stabilizer link (3) to stabilizer bar (4). Slide link ball joint stem (1) from bar, then remove bar
from vehicle.
INSTALLATION
RWD
NOTE: When attaching stabilizer link to stabilizer bar, make sure link ball joint stem is pointed inboard toward engine cradle.