Magnum V8-5.7L VIN H (2005)
4. Remove rear exhaust system (2) (dual-outlet exhaust shown in figure).
5. Apply alignment index marks (3) to the propeller shaft rubber coupler (1) and axle flange (2).
6. Remove three propeller shaft coupler-to-axle flange bolts and nuts.
7. Support propeller shaft (2) using a bungee cord (1). Attach ends of cord to fuel tank straps as shown.
NOTE: Due to short travel and low spring tension, it is not necessary to lock-out parking brake lever to service parking brake components.
