Magnum V8-5.7L VIN H (2005)
8. Disconnect front parking brake cable (2) at connector (1) to right rear parking brake cable.
9. Remove front parking brake cable (2) from equalizer (4).
10. On each rear disc brake:
a. While holding guide pins from turning, remove disc brake caliper guide pin bolts (2).
b. Remove brake caliper (1) from brake adapter (3) and pads.
c. Guide brake caliper up through suspension, following brake hose path. Support caliper above rear suspension using with bungee cord or wire
to keep caliper from overextending brake hose when crossmember is lowered.
NOTE: To remove wheel speed sensor connector from body wiring harness connector, move retaining clip (2) and pull sensor connector outward.
