dodge Workshop Repair Guides

Dodge Workshop Service and Repair Manuals

Fluid Filter - A/T > < Check Oil Level|Page 3536
Page 1
background image

Fluid - A/T: Service and Repair
Fluid Fill

TRANSMISSION FILL

To avoid overfilling transmission after a fluid change or overhaul, perform the following procedure:
1. Verify that the vehicle is parked on a level surface.
2. Remove the dipstick tube cap.
3. Add following initial quantity of Mopar ATF +4, Automatic Transmission Fluid, to the transmission:

a. If only fluid and filter were changed, add 5.0 L (10.6 pts.) of transmission fluid to transmission.
b. If the transmission was completely overhauled or the torque converter was replaced or drained, add 7.7 L (16.3 pts.) of transmission fluid to

transmission.

4. Check the transmission fluid and adjust as required.

Fluid Filter - A/T > < Check Oil Level|Page 3536